Hot tub filters with Australian spa parts help a lot in keeping this type of pool equipment working properly. It has a key role in maintaining the cleanliness of the bathwater. A clogged or broken filter is a major concern because it may contaminate the water with undesirable materials, including oil or hair. Replacing the faulty or badly damaged filter can be costly at times.
With proper cleaning and care, it will last for years. Through that whole measure, you can save both your money and the world by decreasing the amount of rubbish you put into landfills.
How easy, simple, and quick is it to clean a hot tub filtration system? You only need to grab your reliable soft-bristle cleaner, some ordinary bleach, and chlorine to help disinfect your pool equipment’s hard water. We suggest that you follow the following steps for this.
- Remove the filter from the tub first. The majority of hot tub filters are easy to remove from underneath the skimmer. Before you remove the filter, make absolutely sure your hot tub equipment is turned off, unplugged from the power outlet.
- Use a soft scrub brush to remove hair, debris, dirt, and everything unnecessary from the filter. Brush the filter around the seams, and do your best to remove as much debris as possible. However, avoid being too hard on your brush. Otherwise, you run the risk of creating unnecessary damage to the filter’s very fine and soft particles.
- You can make use of a power washer to pressure wash the filter. If you don’t have access to one, a normal garden hose with a low-pressure nozzle can still get the job done. At a 45-degree angle, spray the filter until you see that the water becomes clear. Insert a broomstick through the midsection of the filter. This will help hold it in place while in the course of washing it.
- Dissolve a quarter cup of a good quality chlorine bleach in about 3 gallons of boiling water. Soak the filter and let it stand in the solution for some time. This will aid in the eradication of germs and other unwanted microorganisms that may have colonized your filter. And since it is a bleaching solution, it will naturally whiten up your filter.
- Thoroughly rinse the filter with hose water. Make sure the water eliminates all traces of chlorine bleach.
- Stand your filter outside and allow it to air dry. Reinstall your filter in your hot tub only after it is completely dry.
Cleaning hot tub filters at least every 3 to 4 months is highly recommended. This will help ensure that it will remain in top working condition for longer than can be estimated.
Do your filter cleaning routine more often if your hot tub with Australian spa parts load is high and frequently used. We also encourage you to secure a spare filter for this. You can use the spare while the other one is undergoing some cleaning work.
The Best Time to Replace Your Hot Tub Filter
Thorough cleaning of your hot tub filter can only do so much. They wear out after some time. From that point onward, they can no longer clean your pool equipment water effectively.
We recommend that you replace your hot tub filters at least once a year. If you use your pool water equipment frequently or if it has a high bather load, carry out the cleaning work more frequently.
Aside from what is given above, another important point to keep in mind is why you need to keep your hot tub filter clean all the time. It can be used as a ground to nullify its warranty. Therefore, it works to your advantage if you make it a habit to check on them once or twice a month.
We suggest you replace your hot tub filter, especially if your pool equipment comes with Australian spa parts, under the following scenarios:
- The filter itself is bent, imploded, or ripped.
- Cracked or brittle end caps.
- Discolored end caps.
Remember this, a clean hot tub filter is a happy filter. You’re going to be a lot happier, too, because you know that the hot tub filter keeps your water clean and free of pollutants and unwanted debris.